| Published by the National Fire Protection Association (NFPA)
The 2008 edition of NFPA 58, Liquefied Petroleum Gas Code, was prepared by the Technical Committee on Venting Systems for Cooking Appliances and acted on by NFPA at its June Association Technical Meeting held June 3-7, 2007, in Boston, MA. It was issued by the Standards Council on July 26, 2007, with an effective date of August 15, 2007, and supersedes all previous editions.
The 2008 edition expands Chapter 14, Operations and Maintenance, with coverage of pipeline systems of 10 or more users and a new section covering the installation of patio heaters. These requirements are part of federal law in United States and are added to help make users of NFPA 58 aware of them.
Important updates and expanded coverage in the 2008 edition LP-Gas Code reduce the risk of propane fires and explosions.
Referenced in countries around the globe, adopted in all 50 states, and part of the Department of Transportation's U.S. Pipeline Safety Regulations, NFPA 58: LP-Gas Code is the definitive source for LP-Gas safety requirements. Work with the 2008 edition to make sure you have the latest criteria for the safe design, construction, installation and operation of all LP-Gas systems, as well as highway transportation of LP-Gas.
The 2008 NFPA 58 includes a new section that addresses small LP-Gas system operators and aids compliance with DOT regs.
Currently covered by U.S. Department of Transportation, regulations for pipeline systems of 10 to 100 users served from one propane tank, such as a mobile home park, are now part of the 2008 LP-Gas Code. Including these requirements will assist propane marketers in complying with what is already federal law, and the simplified Code language makes requirements easier to understand and apply.
Other important changes that advance safety include:
- New location requirements for patio heaters.
- Revised table of small container appurtenances.
- New rule to require notification of trackside transfer from rail cars,
- New coverage of elevated pressure propane systems (20 – 50 psi) used in cogeneration systems, microturbines, metal cutting and similar industrial operations.
- Clarified requirements for flexible connectors used as part of piping systems.
For engineers, inspectors, AHJs, facility owners, and maintainers who want to pass inspections and make the safety grade, the 2008 NFPA 58 is the clear choice!
Table of Contents
Chapter 1: Administration. Chapter 2: Referenced Publications. Chapter 3: Definitions. Chapter 4: General Requirements. Chapter 5: LP-Gas Equipment and Appliances. Chapter 6: Installation of LP-Gas Systems. Chapter 7: LP-Gas Liquid Transfer. Chapter 8: Storage of Cylinders Awaiting Use, Resale, or Exchange. Chapter 9: Vehicular Transportation of LP-Gas. Chapter 10: Buildings or Structures Housing LP-Gas Distribution Facilities. Chapter 11: Engine Fuel Systems. Chapter 12: Refrigerated Containers. Chapter 13: Marine Shipping and Receiving. Chapter 14: Operations and Maintenance. Chapter 15: Pipe and Tubing Sizing Tables. Annex A: Explanatory Material. Annex B: Properties of LP-Gases. Annex C: Design, Construction, and Requalification of DOT (ICC) Cylinders. Annex D: Design of ASME and API-ASME Containers. Annex E: Pressure Relief Devices. Annex F: Liquid Volume Tables, Computations, and Graphs. Annex G: Wall Thickness of Copper Tubing. Annex H: Procedure for Torch Fire and Hose Stream Testing of Thermal Insulating Systems for LP-Gas Containers. Annex I: Container Spacing. Annex J: Sample Ordinance Adopting NFPA 58. Annex K: Burial and Corrosion Protection for Underground and Mounded ASME Containers. Annex L: Informational References. Index. |
