 |
 |
 |
|
Developed under the ANSI concensus standard process, the 2009 Uniform Solar Energy Code applies to the erection, installation, alteration, repair, replacement, addition to, use or maintenance of solar energy systems.
From the Foreword
The advantages of a Uniform Solar Energy Code, acceptable in the various jurisdictions, have long been recognized. The increasing needs for such a code induced the International Association of Plumbing and Mechanical Officials to pass a resolution at its 46th Annual Business Conference, which directed the president to form a committee to develop a basic solar energy document.
After months of concerted endeavor, this committee, composed of representatives from industry and public utility companies, inspectors, plumbers, and engineers, successfully completed the first edition of the Uniform Solar Energy Code, which was officially adopted by the International Association of Plumbing and Mechanical Officials in September 1976.
In presenting the 2009 edition, IAPMO recognizes that the ultimate code has not yet been attained. Users of this code are respectfully urged to present whatever amendments their experience may dictate to IAPMO World Headquarters in accordance with the Regulations Governing Consensus Development of the Uniform Solar Energy and Swimming Pool, Spa & Hot Tub Codes. Amendments adopted by the committee are published every three years. This process serves to keep this basic document abreast of technological development.
The use of this document is intended to provide a safe and functional solar energy system with minimum regulations. Users of the Uniform Solar Energy Code are urged to strive for not just the minimum good solar energy system, but to keep the consumer in mind. With the exception of "high use and wear portions" of the system, the solar energy system should have the same life as other components of the building.
The Uniform Solar Energy Code is dedicated to all those who have unselfishly devoted their time and effort to create and maintain it.
Table of Contents
Chapter 1: Administration. Chapter 2: Definitions. Chapter 3: General Regulations. Chapter 4: Piping. Chapter 5: Joints and Connections. Chapter 6: Thermal Storage. Chapter 7: Collectors. Chapter 8: Thermal Insulation. Chapter 9: Duct Work. Chapter 10: Electrical. Chapter 11: Material Standards. Appendix A: Conversion Table. Appendix B: Symbols. Appendix C: Engineered Solar Systems. Index. |
|
|
|
|
|
|
|
|
